em-signal-card

EM Signal Card

RFID tags are constructed to withstand intentional sabotages, which can be read from long distances(0-12cm) and operated in wide temperature ranges. They are also completely waterproof, and can be sealed inside non-metalic material walls; Button, circle, keyring, nail and cylinder-shaped cards used as guard tour checkpoints. These can be installed either on or beneath wall surfaces; Key chain-attachable type personnel / incident card used to identify patrol personnel or events and incidents. Its working frequency is 125KHz

   

Product Description

RFID tags are constructed to withstand intentional sabotages, which can be read from long distances(0-12cm) and operated in wide temperature ranges. They are also completely waterproof, and can be sealed inside non-metalic material walls; Button, circle, keyring, nail and cylinder-shaped cards used as guard tour checkpoints. These can be installed either on or beneath wall surfaces; Key chain-attachable type personnel / incident card used to identify patrol personnel or events and incidents. Its working frequency is 125KHz

Technical Specification

Physical Water-resistant ant, ASB plastic case
Shape Nail, button, circle, keyring and cylinder shape, etc.
Weight About 2 g
Operating Temperature -20° C to +50°C
Working Frequency 125KHz
Battery None
Data Storage Unique 64-bit serial number (read-only)

Charger

 
Input Voltage AC 110V-220V, 50-60 HZ
Output Voltage 4.5V-14V, 300-500mA
Operating Standard GB 4943-2001

USB communication cable

Use POGO Pin connector as communication cable, which is according with DY/T1019, IEC61156, ANSI/EIA/TIA-568 standard

Hardware quick start guide

  1. The patrolling guard takes the reader and read his own Guard ID to identify himself with the system
  2. Then the guards go to the checkpoints, the Reader will automatically read each RFID tag and no need touch it. When reading successfully, a flash of the blue indicator light accompanied by a “vibration” means that a reading has been made. The WM-5000V5 reader will store the signal card’s ID number and time for every station reading.
  3. After patrolling are done, use the USB cable to connect the computer and Reader directly and get a data analysis and management